Innovative adhesion promoter to be used as an additive in the painting cycles of AAS, ABS, PUR, PC and PP plastics. It transforms a classic paint product, be it a finish or a primer, into a product with direct application on plastic, without the use of primers. When diluted it can also be used as a primer.
Before starting the treatment, always wash the surface with soap and water, then degrease with an antistatic water degreaser H2S.0003.

USE AS AN ADDITIVE:
Add 15-20% of the additive to the finished product, replacing a portion of thinner to the percentage shown in the data sheet.
The additive may be used on all of the following products:

- FILLERS KFL.(6666; 7777; 8888) or KFL.(3010; 3070)
- BINDER 2K: KJO.0200; KJL.0333; KJL.0330
- BINDER 1K: KJN.1777; KJN.1765

Example: the opaque base provides an 80% dilution, in case you want to apply it directly on plastic you replace a 20% of thinner with the additive, then we will have:
100 gr matte base + 20% additive for plastics KFP.0116 + 60% acrylic thinner to reach a total of 80%.

USE AS A PRIMER:
Dilute 1:3 with one of the IVAT RDL series thinners (L666; S777; F888; P333) to obtain a plastic primer. Apply as it is directly on the plastic backing previously degreased. Let it wither for 15-20 minutes and apply the finish. It can be overpainted with any type of single- and two-component product.
Example: KFP.0116 100gr. + 300gr of RDL. (L666; S777; F888; P333) = 400gr of finished product.

WARNING FOR APPLICATIONS ON PP Before painting the supports in polypropylene (PP) we recommend a light sanding or bufing of the support.

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.